10KW Heating And Cooling Heat Pump R32 Air Source Multifunctional Multimodal

R32 Air Source Multifunctional & Multimodal Heating And Cooling Heat Pump

R32 is multifunctional!

Operation mode: Press M key to switch from wire control point

1. Heating: the end of the fan coil.

2. Refrigeration: the end of the fan coil.

3. The floor heating: the end of the floor heating coil.

4. Hot water: the end of the hot water tank.

5. Heating + Hot water: the end of the fan coil + hot water tank.

6. Refrigeration + hot water: the end of the fan coil + hot water tank.

7. Floor heating + hot water: the end uses fan coil + hot water tank.

8. Silent mode: constant frequency/constant wind speed operation, suitable for all modes (long press the up and down keys 3s).

(Note: In the mixing mode, the hot water is preferred. When the hot water temperature reaches the set value, the other mode in the mixing mode is transferred.)

R32 is multimodal!

1. High temperature sterilization function: hot water tank sterilization.

2. Hot water return water function: hot water return water pipe return pump control.

3. Linkage function: linkage switch to start and stop the unit.

4. Mode remote switch function: mode switch.

5. Water pump forced emptying function: pipe emptying.

6. Standard Modus communication: remote control and check the operating status of the unit on the client platform.

7. Timing switch function: set time period to start and stop the unit, 3 time periods every day.

8. Set water temperature curve function: according to the local climate conditions and customer habits to adjust the appropriate setting temperature.

9. Secondary circulation pump control (indoor water pump).

10. Multi-heat source pump control (heat source hot water pump, heat source heating pump).

11. Cascading function.